Binson's Home Health Care Centers, Medical Supplies & Services Since 1953 (888) Binsons Add to Bookmarks ISO 9001: 2000 Certified Quality Accreditation Commission for Health Care valuable coupons free discreet shipping of adult diapers

Shop Binson's Web Store

Since these pages were converted from PDF, some of the content may appear garbled. To the best of our knowledge, the information contained herein is accurate. However, neither Binson's, or any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. This manufacturer information is for educational purposes only.


This is the html version of this file.











Page 1
Invacare


®


Seating & Positioning Products


The Invacare


®


InTouch





Propel





Back, the general
purpose back support so lightweight and comfortable
consumers will forget it’s there. Hardware installation is
no longer a hassle: just grab it, set it and go. The rigid shell
coupled with a soft contoured foam cushion provides
gentle support and facilitates postural symmetry. The
Propel provides a stable surface for propulsion and
completion of daily living activities. Consumers will leave
ordinary back upholstery in the past when they try the
new InTouch Propel.
HCPCS Code = E2611


© 2007 Invacare Corporation.
All rights reserved. Trademarks are identified by the symbols ™ and ®. All trademarks are
owned by or licensed to Invacare Corporation
unless otherwise noted.
Specifications are subject to change without notification.


The Invacare


®


InTouch





Stabilite





seat cushion was
developed to provide pelvic stability and leg positioning for
patients with postural asymmetry. The Stabilite comes fitted
with a ThinAir





liner, a unique comfort layer that assists in
redistributing peak pressures away from bony prominences.
The Invacare


®


InTouch





Flovair





seat cushion was
developed to provide pelvic stability, leg positioning and
pressure management for patients with postural asymmetry
and skin integrity concerns. It incorporates a fluid overlay
used in tandem with the ThinAir





liner. This allows for pelvic
immersion while minimizing overall product weight. The
insert’s unique channeling method limits the amount of fluid
migration, thus decreasing the chances for “bottoming out.”
The Flovair is a great choice for neuromuscular, TBI or SCI
clients without significant obliquity.
HCPCS Code = E2607, E2608


(Gentle Contour)


HCPCS Code =E2607, E2608


(Gentle Contour)


E2605


(Max Contour)


Page 2
Invacare


®


Seating & Positioning Products


Invacare


®


Seating & Positioning Products


Invacare


®


Rehab Seating & Positioning Products


With the number of new seating and positioning products available today, it’sonly
natural to choose the products that you know best. Invacare seating and positioning
products offer a clinical benefit while making life more comfortable for the consumer.
Thiscatalog is your source for Invacare seating and positioning products.
Whether it’sthe comfort and style of an Absolute





cushion, or the revolutionary
InTouch





Flovair





and Stabilite





, Invacare seating and positioning products
provide optimal solutions, for any individual’s seating needs. Not only do Invacare
products raise the benchmark in functionality and comfort for the consumer, but they
also ensure that all providers can have confidence in our quality products.
For your convenience, we have included a perforated Off-the-Shelf Product Guide that
can be easily torn-off and used for reference. Post it on the wall, place it in a binder or
keep it with you as you travel to see clients. However you decide to use it, we hope it
helps in choosing Invacare products.
Invacare is committed to providing you with products that exceed your expectations.
As the landscape of seating changes,Invacare’s dedication to innovation, quality and,
most of all, your comfort, will stay the same.


TEAR AL
ONG
THIS
EDGE


Page 3
5
11


Invacare


®


Seating & Positioning Products


Invacare


®


Seating and Positioning Products


Infinity Cushions (page 6)


Lo Contour
Gentle Contour
Max Contour
Seat width
13" – 22"
13" – 22"
13" – 22"
Seat depth
15" – 20"
15" – 20"
15" – 20"
Product weight
4 lb.
4 lb.
4 lb.
Weight capacity
250 lb.
250 lb.
250 lb.
Limited warranty
2 years
2 years
2-years
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44036-2125
(800) 333-6900
Canada
Invacare Canada Inc.
570 Matheson Blvd E
Unit 8
Mississauga Ontario
L4Z 4G4 Canada


Invacare


®


Seating & Positioning Products


Table of Contents


Invacare


®


Cushions........................................1-7
Absolute





........................................................1
Comfort-Mate Extra ......................................2
Stabilite





........................................................3
Flovair





............................................................4
TargIT





............................................................5
Infinity


®


Cushions ..............................................6
Invacare


®


Backs ............................................7-8
Propel





............................................................7
Personal Back





10 ........................................8
Personal Back 10 Plus..................................8
Accessories ..................................................9-10
Specifications ..................................................11


TargIT





(page 5)


Seat width
15" – 24"
Seat depth
15" – 22"
Product weight
3 lb.
Weight capacity
15" – 20" W
300 lb.
21" – 24" W
500 lb.
Limited warranty
2 years


* All weights/measurements are approximate


Propel





Back (page 7)


Width range
16"– 21" (1"


increments


)
Product height
16.5"
Depth adjust
1.75"
Angle adjust
+/-27°
Product weight
4 lb.
Weight capacity
300 lb.
Limited warranty
2 years


*


All weight/measurements are approximate


Specifications


*
Personal Backs (page 8)


Personal Back





10
Personal Back





10 Plus
Back height
13" – 14" widths
14", 16"
14", 16"
15" – 26" widths
16", 19"
16", 19"
Back width
13" – 20", 22", 24", 26"
13" – 20", 22", 24", 26"
Product weight
13" – 20" widths
5 lb.
6 lb.
22" – 26" widths
10 lb.
11 lb.
Weight capacity
13" – 20" widths
250 lb.
250 lb.
22" – 26" widths
500 lb.
500 lb.
Limited warranty
2 years
2 years
© 2007 Invacare Corporation.
All rights reserved. Trademarks are
identified by the symbols ™ and ®.
All trademarks are owned by or licensed
to Invacare Corporation unless otherwise
noted.


Specifications are subject to change
without notification.


© 2007 Invacare Corporation.
Form No. 06-043 Rev. 04/07


Stabilite/Flovair Cushions (page 3 and page 4)


Seat width
15" – 24" Gentle
15" – 20" Max
Seat depth
15" – 22" Gentle
15" – 20" Max
Product weight
3.05 lb. Stabilite
4.20 lb. Flovair
Weight capacity
15" – 20" 250 lb.
21" – 24" 350 lb.
Limited warranty
2 years


Page 4
Invacare


®


Cushions


Invacare


®


Cushions


1


Invacare


®


Cushions


Invacare


®


Cushions


Invacare


®


Absolute





Series: Simple seating solutions for comfort, fit and function.
InTouch


®


Absolute





Cushion


(formerly Essential





Cushion)
Model no. EC


•Molded polyurethane foam provides comfort and durability
•Breathable, water repellant cover
•Non-slip bottom with hook and loop fasteners keeps cushion securely in place
•Six sizes from 16" x 16" to 20" x 18"
•Shaped cushion bottom for use on taught sling upholstery


Comfort Thickness


A. Height at adductor 3.25"
B. Height at abductor
2.25"
C. Height at rear
2"


InTouch


®


Comfort-Mate Extra Cushion


Model no. CMEX


Comfort Thickness


A. Height at adductor
2.625"
B. Height at abductor
3.0"
C. Height at rear
1.75"
D. Height at leg trough
2.25"
Cushion weight approximately 2.3 lb.
(18" x 16" cushion w/cover)


•Low profile, lightweight cushion designed for long-term sitting comfort
•Comfortable, molded dual-firmness polyurethane foam promotes good postural position
•Moisture-resistant coating seals and protects foam from moisture; easily wipes clean
•Breathable, water repellant cover
•Beveled sides coupled with a firm base for stability and a soft outer layer for comfort
•A great fit for the Infinity


®


Drop Base to get your desired seat-to-floor


For clients with mild to moderate seating needs, the Invacare


®


Absolute





Series cushions offers a wide range of simple, but highly
functional solutions. The Absolute cushion is designed to provide comfort at an affordable price.


B
A
C


2


The Invacare Comfort-Mate Extra cushion goes one step further with a comfortable, molded design and a durable moisture-resistant coating.


HCPCS Code = E2601
HCPCS Code = E2603, E2604


•Comfort
•Adults and geriatrics, primarily comfort, able to do own weight shift for pressure relief
•Good rental wheelchair cushion


Application Guide


•Comfort stability and gentle positioning
•Adolescents through geriatrics with long-term comfort needs, who are able to do own weight shift


for pressure relief


•Good long-term care facility wheelchair cushion


Application Guide


Page 5
3


Invacare


®


Cushions


Invacare


®


Cushions


4


Invacare


®


Cushions


Invacare


®


Cushions


Features


Positioning foam base
+
ThinAir





liner
Gentle/Max contour


The Stabilite





seat cushion was developed to provide pelvic stability and leg
positioning for patients with postural asymmetry. The Stabilite comes fitted with
a patent-pending ThinAir





liner, a unique comfort layer that assists in redistribut-
ing peak pressures away from bony prominences. The Stabilite is a great choice
for geriatric or CVA clients.


InTouch





Stabilite





“Stable + Light”


Functional Benefits


Supports the pelvis and thighs; helps to prevent adduction and
internal rotation
Helps reduce shear
Contour choices based on involvement level
Gentle Max
Contour Contour
A. Height at adductor
3.5"
4.38"
B. Height at abductor 3.5"
4.38"
C. Height at leg trough 2.87"
2.88"


Contour Thickness


InTouch





Flovair





/Stabilite





Gentle Contour InTouch





Flovair





/Stabilite





Max Contour


Features


Positioning foam base
Fluid + ThinAir





liner
Gentle/Max contour


The Flovair





seat cushion was developed to provide pelvic stability, leg position-
ing and pressure management for patients with postural asymmetry and skin
integrity concerns. It incorporates a fluid overlay used in tandem with the
ThinAir





liner. This allows for pelvic immersion while minimizing overall product
weight. The insert’s unique channeling method limits the amount of fluid migra-
tion, thus decreasing the chances for “bottoming out.” The Flovair is a great
choice for neuromuscular, TBI or SCI clients without significant obliquity.


Flovair


Flovair


Flovair


InTouch





Flovair





“Fluid over Air”


+


Functional Benefits


Supports the pelvis and thighs; helps to prevent adduction and
internal rotation
Effectively redistributes pressure without weight penalty.
Additional shear reduction as two layers work in
harmony.
Contour choices based on involvement level


The larger the surface area, the lower the
pressure. Our engineers put purpose behind the
contouring of the InTouch base to mimic the
shape of the seated human body. Leg troughs
are slightly abducted. Soft foam envelops the
IT’s, coccyx and sacrum. Firmer foam supports
the trochanters while preventing hammocking.
Smooth, refined transitions are sculpted to
replace steep ridges or uncomfortably placed
abductors.
If the base isn’t right, then nothing else matters!
Features


Medial thigh support
Raised adductors
Sacral relief
Pre-ischial elevation
Lateral pelvic support
Low profile


Functional Benefits


Gentle control of mild adduction tendency
Positioning guidance to maintain proper alignment of lower
extremities
Provides additional comfort and support for those sitting in anterior
to posterior pelvic tilt
Limits forward migration of pelvis and sliding out of position
Intended to maintain pelvis in a centered position on the seat and
provide lateral stability
Reduces seat-to-floor height for foot propulsion and lateral transfers


Positioning Support Base


Stabilite


Stabilite


Stabilite


Maximize surface area


HCPCS Code = E2607, E2608


(Gentle Contour)


E2605


(Max Contour)


HCPCS Code = E2607, E2608


Model no. ITFG, ITFM
Model no. ITSG, ITSM


Page 6
6


Invacare


®


Cushions


Invacare


®


Cushions


Invacare


®


Single Density Cushion


Model no. SD


•Contoured deformation cut foam provides com-


fort and stability


•Available in over 100 custom sizes
•Water repellent cover with non-slip bottom


Cushion Thickness


A. Height at rear (adductor)
2"
B. Height at rear (center)
1.5"
C. Height at front
2.5"
Cushion weight approximately 2 lb.


C
B
A


ViscoFoam


Model no. ILCVF, IGCVF, IMCVF


ViscoFoam is an excellent choice for clients who:


•Are at high risk of skin breakdown
•Require excellent support and stability
•Require a lightweight cushion


FloGel


®


Model no. ILCFG, IGCFG, IMCFG


FloGel


®


is an excellent choice for clients who:


•Are at high risk of skin breakdown
•Require excellent support and stability
•Require a good dynamic shear reduction


AirFlo





Model no. ILCAIR, IGCAIR, IMCAIR


AirFlo





is an excellent choice for clients who:


•Have a history of or are considered to be at


very high risk of skin breakdown


•Require an air flotation insert for immersion


of bony prominences


•Require a postural support base for stability


LoContour


LoContour is an excellent choice for clients who:


•Have good postural control
•Have low to normal muscle tone
•Laterally transfer
•Foot propel


Gentle Contour


Gentle Contour is an excellent choice for clients
who:


•Have moderate postural instability
•Require gentle control of tone
•Need moderate control of


abduction/adduction tendency


Max Contour


Max Contour is an excellent choice for clients
who:


•Require high level of postural control
•Need maximum control of tone
•Require optimal pressure reduction


and redistribution


Invacare


®


Infinity


®


Cushions


Application


•Comfort
•Adult and geriatric, able to do own weight shift for pressure relief
•Good rental wheelchair cushion


5


Invacare


®


Cushions


Invacare


®


Cushions


Positioning Support Base
The support base of the TargIT cushion is constructed with molded
polyurethane foam contoured to promote comfort, enhance positioning
and prevent bottoming out.


Features:
Functional Benefits:


•Medial Thigh Support (Abductor)


Gentle control of mild adduction tendency


•Raised Adductors


Positioning guidance to maintain proper
alignment of lower extremities


•Mild Hip Guides


Adductors are extended posteriorly to keep
user centered on cushion


•Pre-contoured sacral area


Provides additional comfort and support
for those sitting in anterior to posterior
pelvic tilt


•Pre-ischial shelf w/ 15 drafted


Limits forward migration of pelvis and
edge
sliding out of position


•Low profile (Gentle)


Reduces seat-to-floor height for foot
propulsion and lateral transfers
Ideal for clients who require a mild to
moderate level of postural support


•Deep IT relief well (Max)


Provides maximum pelvic immersion and
control
Ideal for clients who require a moderate to
high level of postural support


with
Technology


Invacare


®


InTouch





TargIT





is the industry standard for consumers who require moderate skin protection and positioning. The
large, anatomically-shaped pelvic surface of the InTouch cushion eliminates the guesswork of placing a consumer in contact with
pressure-relieving material. The construction of the InTouch TargIT incorporates an exclusive Blend
2





foam molding technology
that fuses the poly urethane base foam with visco-elastic pressure-relieving foam to eliminate transitional edges, providing worry-
free fit and comfort.


Features


Model no. ITTG, ITTM


•InTouch





Zone technology


•Blend


2



foam molding technology


•Sacral relief
•Gentle/Contour
•Bariatric sizes available


InTouch





TargIT





Max and Gentle Contour Cushion


Gentle
Max
Contour Contour
A. Height at adductor
3.625"
4.35"
B. Height at abductor
3.625"
4.35"
C. Height at leg trough
2.50"
2.85"


Contour Thickness


InTouch





TargIT





Gentle Contour
InTouch





TargIT





Max Contour


HCPCS Code = E2607, E2608


Page 7
8


Invacare


®


Backs


Deep lateral contour of the Personal Back10 Plus
provides increased midline support without
interfering with upper extremity
range of motion.


The Personal Back





10
and Personal Back





10 Plus
combine simplicity of design
with effectiveness of
application. The highly popular
Personal Back line continues to
provide the comfort, postural
support, and spinal alignment
that you have come to expect.


Features


•Lightweight aluminum shell
•Pre-contoured shell provides


excellent contact and support


•Pre-drilled headrest pattern
•Quick Set





hardware with
increased adjustability


•Bariatric sizes available: 22", 24"


and 26" widths at 500 lb. weight
capacity


Personal Back





10


Model no. PBR, PBT


The Personal Back10 is an excellent choice for clients who
require comfort and stability with moderate midline support.


Personal Back





10 Plus


Model no. PPR, PPT


The Personal Back10 Plus is an excellent choice for clients
who require comfort and stability with increased midline
support. It often is recommended when using the foam-in-
place kit.


Pre-drilled headrest mounting pattern
accommodates most major manufacturers’
headrest systems.
Lightweight, durable, aluminum shell is pre-
contoured to provide excellent contact and
support.
Width


13"
14"
15"
16"
17"
18"
19"
20"
22"
24"
26"
A
12.25
12.25
13.25
13.25
14.25
14.25
15.25
15.25
16.25
16.25
17.25
B
9.50
10.50
11.50
12.50
13.50
14.50
15.50
16.50
18.50
20.50
22.50
C
5.00
5.25
5.50
5.50
5.75
5.75
6.00
6.00
6.50
6.75
7.25


Width


13"
14"
15"
16"
17"
18"
19"
20"
22"
24"
26"
A
13.00
13.00
14.00
14.00
15.00
15.00
16.00
16.00
17.00
17.00
18.00
B
9.50
9.50
10.50
10.50
11.50
11.50
12.50
12.50
13.50
13.50
14.50
C
6.75
7.00
7.25
7.25
7.50
7.50
7.75
7.75
8.25
8.5
8.75


Personal Back





10
Personal Back





10 Plus


Personal Back





10
Personal Back





10 Plus


Personal Back Back Heights


Width
Regular
Tall
13" - 14"
14"
16"
15" - 26"
16"
19"


Dimensions


All measurements in inches.


Invacare


®


Backs


HCPCS Code = E2615, E2616


7


Invacare


®


Backs


Invacare


®


Backs


Introducing the Invacare


®


InTouch





Propel





, the general purpose back support so lightweight and comfortable consumers will forget
it’s there. Hardware installation is no longer a hassle: just grab it, set it and go. The rigid shell coupled with a soft contoured foam
cushion provides gentle support and facilitates postural symmetry. The Propel provides a stable surface for propulsion and
completion of daily living activities. Consumers will leave ordinary back upholstery in the past when they try the new InTouch Propel.


Features


Model no. ITPR


•4-way adjustability: height/width/depth/angle
•1-handed quick release
•1-tool assembly (7/8" wrench)
•2-point mountings fit 7/8" to 1" canes
•3-point comfort foam
•Adjustment while patient is seated


1-handed quick release
Adjust depth/angle while client is seated
Comfort and contour
Positioning
Support
Scapular cut-outs
Redundant
tissue cut-outs


HCPCS Code = E2611


Fits 7/8" or 1" canes with no additional hardware.


Page 8
9


Invacare


®


Seating & Positioning Accessories


Invacare


®


Seating & Positioning Accessories


Full Tray - Slide-on Mount


•Break-resistant clear polyester


resin tray surface


•Width adjustable mounting


hardware securely fastens tray to
chair arm pads


•Molded-in rim helps keep items


on tray


Full Tray -
Hook and Loop Mount


•Break-resistant clear polycarbonate


tray surface


•Easily attaches to chair armrest


with hook and loop straps


•Removable trim allows thorough


cleaning


Half Tray - Swingaway





•Break-resistant clear polycarbonate


tray surface


•Tray securely bolts to wheelchair


armrest


•Tray easily swings away when


not in use


Belts and Straps





•Three sizes of shoulder supports


fit child, junior and adult


•Three sizes of padded lap belts fit


child, junior and adult - pinch
release buckles


•Push-button style release provides


secure attachment


•Three sizes of four-point lap belt to


fit child, junior and adult - push but-
ton release buckle


10


Invacare


®


Seating & Positioning Accessories


Invacare


®


Seating & Positioning Accessories


Cushion Rigidizer


•Lightweight plastic seat insert
•Securely attaches to bottom of


cushion inside cover


•Fits between seat rails for level


support


•Eliminates hammock effect of


seat upholstery


Adjustable Headrests





•Contoured head and neck supports


available in four styles


•Dual-ball swivel hardware for


multi-plane adjustment


•Durable steel reinforced


polyurethane pads - easily
wipe clean


Foam-In-Place Kit


•Easy-to-use Foam-in-Place kit


provides custom foam mold insert
in minutes


•Can be used with Personal


Back





10/Personal Back





10 Plus


Basic Headrest





•Padded to provide comfortable


occipital support


•Horizontal and vertical adjustable


hardware


•Outer cover easily removes for


laundering


Infinity


®


Drop Base


•Width adjustable: Three sizes fit


wheelchairs from 14" to 22" wide


•Height and angle adjustable:


Up to 2" of drop provided


•Portable quick-release hardware


allows easy removal of base from
wheelchair