|
Since these pages were converted from PDF, some of the content may appear garbled. To the best of our knowledge, the information contained herein is accurate. However, neither Binson's, or any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. This manufacturer information is for educational purposes only.
This is the html version of this file..
Page 1
InTouch
™
Stabilite
™
Invacare
®
InT
ouch
™
Seat Cushions
Features
Positioning foam base
+
ThinAir
™
liner
Gentle/Max contour
Functional Benefits
Supports the pelvis and thighs;
helps to prevent adduction and internal rotation
Helps reduce shear
Contour choices based on involvement level
The Stabilite
™
seat cushion was developed to provide pelvic stability and leg positioning
for patients with postural asymmetry. The Stabilite comes fitted with a patent pending
ThinAir
™
liner, a unique comfort layer that assists in redistributing peak pressures away
from bony prominences. The Stabilite is a great choice for geriatric or CVA clients.
HCPCS Code = E2605, E2606
Stabilite
Stabilite
Stabilite
InTouch
™
Flovair
™
Features
Positioning foam base
Fluid + ThinAir
™
liner
Gentle/Max contour
Functional Benefits
Supports the pelvis and thighs; helps to prevent
adduction and internal rotation
Effectively redistributes pressure without
weight penalty. Additional shear reduction as
two layers work in harmony.
Contour choices based on involvement level
The Flovair
™
seat cushion was developed to provide pelvic stability, leg positioning and
pressure management for patients with postural asymmetry and skin integrity concerns.
It incorporates a fluid overlay used in tandem with the ThinAir
™
liner. This allows for
pelvic immersion while minimizing overall product weight. The insert’s unique
channeling method limits the amount of fluid migration, thus decreasing the chances for
“bottoming out”. The Flovair is a great choice for neuromuscular, TBI or SCI clients
without significant obliquity.
HCPCS Code = E2607, E2608
Flovair
Flovair
Flovair
With the new InTouch
™
Stabilite
™
and Flovair
™
cushions from Invacare, less
is more! These hybrid
cushions combine contouring
with the latest advancements
in pressure relieving
technology to create a
seating experience like no
other. InTouch cushions
capture the stability of foam,
the pressure relief of air and
the shear reduction of fluid.
This is all accomplished with
less volume than has
traditionally been used in
wheelchair cushions, thus
reducing weight and
maximizing comfort.
Positioning Support Base
The larger the surface area, the lower the pressure. Our engineers put purpose behind
the contouring of the InTouch base to mimic the shape of the seated human body. Leg
troughs are slightly abducted. Soft foam envelops the IT’s, coccyx and sacrum. Firmer
foam supports the trochanters while preventing hammocking. Smooth, refined
transitions are sculpted to replace steep ridges or uncomfortably placed abductors.
If the base isn’t right, then nothing else matters!
Features
Medial Thigh Support
Raised Adductors
Sacral relief
Pre-ischial elevation
Lateral pelvic support
Low profile
Functional Benefits
Gentle control of mild adduction tendency
Positioning guidance to maintain proper alignment of
lower extremities
Provides additional comfort and support for those sitting
in anterior to posterior pelvic tilt
Limits forward migration of pelvis and sliding out of
position
Intended to maintain pelvis in a centered position on the
seat and provide lateral stability
Reduces seat-to-floor height for foot propulsion and
lateral transfers
Invacare
®
InTouch
™
Seat Cushions
Invacare
®
InT
ouch
™
Seat Cushions
Maximize surface area
“Stable + Light”
“Fluid over Air”
Specifications*
Seat width
15" – 24"
Seat depth
15" – 22"
Weight capacity
15" – 20" W
250 lb.
21" – 24" W
350 lb.
Limited warranty
2 years
* All weights/measurements are approximate
+
Page 2
Invacare
®
InTouch
™
Seat Cushions
InTouch
™
Stabilite
™
InTouch
™
Flovair
™
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44036-2125
(800) 333-6900
Canada
Invacare Canada Inc.
570 Matheson Blvd E
Unit 8
Mississauga Ontario
L4Z 4G4 Canada
Invacare, the Blue Medallion
Design and Yes, you can. are
registered trademarks
and Comfort comes standard,
InTouch, Infinity, ThinAir,
Flovair and Stabilite are
trademarks of Invacare
Corporation. Specifications
are subject
to change without
notification.
© 2006
Invacare Corporation
Form No. 06-014
Rev. 09/06
‘‘Invacare says
‘Yes, you can
®
,’and
I couldn’t have said it
better myself.’’
Invacare
®
InTouch
™
Seat Cushions
Seating Accessories
Gentle
Max
Contour Contour
A. Height at adductor
3.5"
4.38"
B. Height at abductor
3.5"
4.38"
C. Height at leg trough
2.87"
2.88"
Contour Thickness
InTouch
™
Flovair
™
/Stabilite
™
Gentle Contour
InTouch
™
Flovair
™
/Stabilite
™
Max Contour
Cushion Rigidizer
•Lightweight plastic seat insert
•Securely attaches to bottom of
cushion inside cover
•Fits between seat rails for level
support
•Eliminates “hammock” effect of
seat upholstery
Infinity
®
Drop Base
•Width adjustable: three sizes
fit wheelchairs from 14" to 22"
wide
•Height angle adjustable up to
2" of drop provided
•Portable quick-release
hardware allows easy removal
of base from wheelchair
Invacare
®
InT
ouch
™
T
a
rgIT
™
Seat Cushions
Moisture Resistant Outer/ Incontinence Inner Covers
•Standard moisture resistant outer cover is machine washable
•Optional Dureflex incontinence inner cover available at no charge
•Dureflex is a moisture proof, vapor permeable and four way
stretch material
A
B
C
C
B
A
|
