Binson's Home Health Care Centers, Medical Supplies & Services Since 1953 (888) Binsons Add to Bookmarks ISO 9001: 2000 Certified Quality Accreditation Commission for Health Care valuable coupons free discreet shipping of adult diapers

Shop Binson's Web Store

Since these pages were converted from PDF, some of the content may appear garbled. To the best of our knowledge, the information contained herein is accurate. However, neither Binson's, or any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. This manufacturer information is for educational purposes only.


This is the html version of this file.













Page 1
Invacare


®


Compass





Series Custom Manual Positioning Wheelchairs





04-153:Compass SeriesCatalog 9/29/06 12:12 AM Page 1


Page 2
2


Compass





- Complex Positioning And Seating Situations


COMPASS SERIES ADULT POSITIONING WHEELCHAIRS
SOLARA


The Invacare


®


Solara


®


offers
innovative weight-shift tilt-in-
space technology for ease of
tilt, along with Smart
Adjustability





, portability and
proven reliability.


COMPASS SPT


The Invacare


®


Compass





SPT





combines a traditional tilt-in-
space design with self-propelling
functionality, all in one wheel-
chair.


COMPASS XE


The Invacare


®


Compass





XE
is a true positioning extended
frame folding wheelchair that
integrates Smart Adjustability,
lightweight portability and dura-
bility.


Invacare’s Smart Adjustability incorporates streamlined frame designs
that allow ample growability with innovative technologies for quick and easy
adjustments. The Invacare


®


Compass





Series adult manual wheelchairs
provide the optimal solution for complex positioning and seating situations.


Invacare


®


Compass





Series Custom Manual Positioning Wheelchairs


Invacare


®


Compass





Series Custom Manual Positioning Wheelchairs


04-153:Compass SeriesCatalog 9/29/06 12:12 AM Page 2


Page 3
Simply Better
Keep it simple. Too many nuts, bolts and moving parts on a wheelchair can take a great
concept and make it too complex. Solara is a noticeable departure from other tilt-in-
space designs. It’s clean, simple and refined in both design and finish.
Weight Shift Tilt-in-Space
The weight shift design of the Solara eliminates tilting the user around a fixed pivot
point. As tilt is initiated, the pivot point on the Solara moves nearly constantly along the
gear rack to help maintain the position of the user’s center-of-gravity. By keeping the
user’s center-of-gravity relatively constant, the falling sensation associated with pivot
point tilts is greatly reduced. This diminishes the startle reflex from the falling sensation
which can trigger extension, interrupting therapy and other daily activities.
Ease of Tilt
The Solara is easy to tilt – even when there is a small caregiver, customized
seating system and larger user. When the caregiver pulls the tilt triggers on the Solara,
the seat remains in place until the caregiver is ready to initiate the tilt. Applying a small
amount of force to both push handles begins a smooth tilt operation that is both easier
for the caregiver and more comfortable for the user.


3


A user’s weight may change
between fitting and delivery. Solara
offers 4" of frame width adjustabili-
ty, allowing fine tune adjustment in
the field.
Solara’s proven gear teeth
mechanisms and gear rack concept
revolutionized the durability of
tilt-in-space wheelchairs.
Thick aluminum flush or drop seat
pans provide maximum durability.
Predrilled for pommel installation.
Redesigned bolt-on wheel locks can
be used with any wheel selection
and can be switched from a push-to-
lock to a pull-to-lock configuration in
seconds.


Solara


®


is built to last. The Solara is known for its durability of frame construction and gear tilt mechanism design. The
new generation Solara retains this durability, and once again revolutionizes tilt-in-space wheelchair design with
incredible simplicity,portability and ease of use and adjustment.


Invacare


®


Solara


®


Adult Tilt-in-Space Wheelchair


04-153:Compass SeriesCatalog 9/29/06 12:12 AM Page 3


Page 4
Recline mechanisms are now mount-
ed on the outside of the back canes
to provide room for off-the-shelf back
hardware. 170 of recline is available
with this option.
Tilt lock-out stops may be used to
limit the tilt range on the low-end,
high-end or both.
Tie-down brackets are attached to
seat frame and clearly marked.


Solara


®


is built to last! Unlike aluminum gear racks, the Solara’s steel gear rack and
teeth won’t wear prematurely. The design uses a steel gear rack and multiple, cable-
activated teeth for a secure hold in a tilted position.
The welded aluminum side frames of the Solara provide a solid base designed to with-
stand the demands of the toughest tilt-in-space wheelchair users.
And you can have confidence knowing that Invacare-designed wheelchairs pass
rigorous performance testing and are backed by a lifetime limited warranty on frames
and crossbraces.
Durability
The weight of a tilt-in-space wheelchair can make a dramatic impact on the life of the
user and caregivers. The Solara is now the lightest weight adult tilt-in-space wheelchair
in its class – a full 20 lb. lighter than the original Solara.
Self-propellers have not only a flared front end for foot placement, but also have a tilt-in-
space frame that approaches the weight of an ultralightweight wheelchair.
Caregivers will find the Solara easier to maneuver and lift into a van or car than
previous models.
Lightweight
Transport Ready Option (TRO*) is available as an option on the Solara. In accordance
with today’s ANSI/RESNA W/C 19 standard, Invacare has crash-tested the Solara with
its popular Personal Back





10 back cushion and Infinity


®


seat cushion, but offers
transport tie-down brackets on the chair for use with other seating systems as
another option.**
* Invacare recommends that wheelchair users NOT be transported in vehicles of
any kind while in wheelchairs. As of this date, the U.S. Department of Transportation
has not approved any tie-down systems for transportation of a user while in a wheel-
chair in a moving vehicle of any type.
** The TRRO Transport Ready Option pick on the Solara order form includes transport
brackets, a wheelchair-anchored pelvic belt and transport locking pins. The Personal
Back and Infinity cushion must also be purchased with this option at
an additional charge. No seating system is included in the base price of the
wheelchair.
Transport Tie-Down Options


4


Invacare


®


Solara


®


Adult Tilt-in-Space Wheelchair


Invacare


®


Solara


®


Adult T
ilt-in-Space Wheelchair


Quick Set





washers (a) snap onto the
frame – preventing loss of cove
washers (b), or anyone’s temper.


a
b


04-153:Compass SeriesCatalog 9/29/06 12:12 AM Page 4


Page 5
5


Reshaped gear rack provides
smoother tilt, enhancing tilting
experience for both user and
caregiver.
Vent tray brackets are able to adjust
with the width of the frame and
vertically in 3/4 inch increments.
Improved tilt angle indicator.
Minimized rear hardware for easy
seat depth adjustment.


•Seat-to-floor heights starting as low as 12.5"


accommodate standing pivot transfers and/or
foot propellers


•Exceptional ground clearance achieved even at lowest


seat-to-floor heights


•Easy to read tilt angle indicator even works on an


unlevel surface


•Flared front end provides more room for the user’s feet
•350 lb. weight capacity available with heavy-duty option
•Telescoping rigging receivers (medium/ large frames)


are double-bolted for increased durability


•Hub lock option locks both wheels with one lever – foot


operated, cane mounted or seat rail mounted – you
choose


•Lift-off front rigging option makes it easier for a


single caregiver to remove a foot box during transfers
and provides a durable alternative to swingaway
front riggings


•Adjustable depth, adjustable angle back canes are


standard


•One axle plate accommodates all wheel options
•Adjustable width back rigidizing bar option available
•Contracture platform and bilateral contracture footrests


available


•Anti-tippers included with base chair are designed to


remain out of way while caregiver pushes the chair


•Stealth headrests and Invacare


®


Seating Options
available from Stealth Products


•Rear tie-down brackets and locking pins are easily


accessible to caregivers


The Finer Details


Invacare


®


Solara


®


Adult Tilt-in-Space Wheelchair


Invacare


®


Solara


®


Adult T
ilt-in-Space Wheelchair


04-153:Compass SeriesCatalog 9/29/06 12:12 AM Page 5


Page 6
ANSI/RESNA W/C 19 sec 6.2 Presale Literature Notification - Solara


A.Minimum turning radius 25".
Minimum turn-around width 38.68".
(16" W Medium Frame chair without footrests).
B.Solara wheelchairs with Long Frame may be longer than 1220 mm, exceeding the ADA definition of a common
wheelchair and the maximum length requirements of lifts on public vehicles, and may therefore present particular difficulties
accessing some vehicles.
C.Total wheelchair mass = 42.0 lb. (19.0 kg) - including front riggings, anti-tips and tie-down brackets. Does not include wheel
locks, wheelchair-anchored pelvic belt and seating.
D.Average lateral dummy displacement = approximately 0.51" (13 mm).
E.Overall Score = 17.
Overall Rating = A.
F. i.The Solara tested was sized to accommodate a 170 lb. test dummy. (Medium Frame, 18"W x 18"D, 60 degree front rigging,
20" composite wheels, 24" urethane tires, aluminum seat pan cushion, Invacare


®


Personal Back





10 seat system, 6"x2" semi-
pneumatic casters.)
ii.The Solara tested was tied-down using four tie-down brackets - 2 brackets located near the front of the seat frame and 2 brackets
located on the rear of base frame.
iii.The Solara was tested with a 170 lb. test dummy.
iv.The Solara tested used a wheelchair-anchored pelvic belt and vehicle-anchored shoulder belt.
v.The Solara tested complies with the performance requirements of ANSI/RESNA W/C 19 sec 5.3.
G.For all types of vehicles, the Solara requires four SAE J2249-compliant tie-down strap assemblies for effective securement.
H.When the TRRO or TRBKTS option is selected, the Solara provides a location for anchoring of an Invacare-
provided pelvic belt. This belt has been tested in accordance with ANSI/RESNA W/C 19.
I.The wheelchair-anchored pelvic belt is supplied by Invacare.
6
Frame Style
Tilt
Seat width
14" - 22"
Seat depth
15" - 22"
Back height
20" and 24"
Overall chair width open
Seat width plus 8.5"
Adjustable Angle Back
0, 10, 20, 30
Tilt range
-5


º


to 50


º


Camber angles
0


º


Tubing outside diameter
1" Reg, Seat rail 1"
Weight capacity
250 lb.
Weight of chair
28.5 lb.**/41.5 lb.***
Limited Warranty
Lifetime on frames and crossbraces


** Base chair weight without accessories
*** 18" x 18", FXDESK, BH20, FLDBACK, AT902, 12COM, A1577, PNEU, 70NTAPER, 1651, TLC, Anti-tippers, Wheel Locks


Knee-to-heel Range*
Front Rigging Type
min
max
60
13.5"
17.5"
60 MFX
9"
12.5"
70
13.5"
16.5"
70 MFX
5.75"
11.75"
70 Tapered
12.75"
16.25"
Elevating
14"
20"
90
4.5"
7.5"


* Range adjusts in 1" increments. Measurement taken from top of seat rail to back of footrest.


Solara


®


Specifications


Seat-to-floor heights
5"
6"
6"
8"
Fork
5S


OFT


, 5A


LUM


AT902
1259
AT903, 1228
12"
16", 16.5"
16", 16.5",
16", 16.5",
17", 17.5"
17"
17.5", 18.5"
18"
14.5", 15",
15.5", 16"
16"
18.5", 19"
15.5", 16"
20"
15", 15.5"
15.5", 16"
16", 16.5"
17"
16", 16.5"
16.5", 17"
22"
16", 16.5"
16", 16.5"
16", 16.5",
17", 17.5"
17"
17.5", 18"
24"
n/a
17"
17.5", 18"
17", 17.5",
18.5", 19"
Arm heights*
Adjustable-Height-Dual-Point
8.5" - 12.5"
(conventional only,range adjusts in 1" increments)
T-Arm
10" - 16" (range adjusts in 1" increments)
8" - 12" (range adjusts in 0.5" increments)


All measurements from top of seat rail to top of armrest.


Invacare


®


Solara


®


Adult Tilt-in-Space Wheelchair


Invacare


®


Solara


®


Adult T
ilt-in-Space Wheelchair


04-153:Compass SeriesCatalog 9/29/06 12:12 AM Page 6


Page 7
7


Dual gas cylinders provide con-
trolled tilt that make the consumer
feel comfortable and secure.
The Compass SPT offers a full 45 of
tilt in front wheel configuration.


Traditional tilt-in-space wheelchair designs often force a choice between meeting independent mobility or positioning
needs. Wheel access is difficult for hand propulsion, and seat-to-floor limitations inhibit foot propulsion. With the
Invacare


®


Compass





SPT





Tilt-in-Space wheelchair, you no longer need to sacrifice independent mobility at the
expense of providing stability and positioning with tilt-in-space. It’s like owning two chairs in one – a self-propelling
wheelchair and a tilt-in-space wheelchair.


Invacare


®


Compass





SPT





– Versatility Beyond Belief


The versatility of the Compass SPT is remarkable. In front wheel configuration, the
consumer can be tilted 10 to 15 for postural support while self-propelling. The SPT
offers a full 45 of tilt at all seat-to-floor heights for postural needs, musculo-skeletal
concerns, sitting tolerance/fatigue management, and functional requirements. The back
can be adjusted from 90 to 120 in 10 increments to meet needs which may include
positioning for kyphotic posture, hip range-of-motion limitations, trunk balance, vision,
or even swallowing. For dependent mobility or caregiver needs, the Compass SPT can
be converted to a rear wheel configuration tilt-in-space wheelchair without requiring
additional parts.


The Compass SPT shown in front
wheel configuration. Use 10-15
of tilt for postural support when
self-propelling.


Invacare


®


Compass





SPT





– Exceptional Wheel Access and Super Low Seat-to-Floor


The Compass SPT can get super low to the ground with a seat-to-floor height starting at
13.5"* for those who foot propel. The SPT also provides exceptional drive wheel access
through its front wheel configuration for hand propulsion, providing the consumer with
several options of self-propulsion.


*13.5-inch seat-to-floor height achieved using an 18" drive wheel and 5" caster. Use special number C-030917115944 when ordering.


Invacare


®


Compass





SPT





Self Propelling Tilt-in-Space Wheelchair


04-153:Compass SeriesCatalog 9/29/06 12:12 AM Page 7


Page 8
8


Quick Set





washers (a) snap onto the
frame – preventing loss of cove
washers (b), or anyone’s temper.
Newly designed adjustable angle
footplate provides a positive lock for
dorsi or planar flexion.
Discreet tilt trigger lock-out levers.


Locating the pivot point closer to the consumer’s center-of-gravity provides a
well-balanced tilt experience, making it easier for the caregiver and less startling for
the consumer. Dual gas cylinders control the tilt, allowing the consumer sitting in the
wheelchair to feel more secure and comfortable during the process.


•Pin and saddle style front riggings


offered to be compatible with
other self-propelling manual
wheelchairs


•Exclusive Quick Set





washers snap
onto frame anywhere frequent
adjustments might occur


•Discreet tilt trigger lock-out levers


help prevent people from
accidentally disengaging the tilt
mechanisms


•Fold-down back and quick-release


wheel option allow for easier
transportability


•Newly designed adjustable angle


footplates have a dual attachment
point for increased durability and
a positive locking mechanism for
dorsi and planar flexion
adjustment


•Adjustable angle stroller handle


option offered for easier
dependent propulsion


•Depth adjustable frame – three


different seat rail lengths available
with at least 3" of adjustment on
each frame


•250 lb. weight capacity


Invacare


®


Compass





SPT





– Balanced and Controlled Tilt
Invacare Compass SPT – Attention To Detail


Invacare


®


Compass





SPT





Self-Propelling Tilt-in-Space Wheelchair


Invacare


®


Compass





SPT





Self-Propelling T
ilt-in-Space Wheelchair


a
b


04-153:Compass SeriesCatalog 9/29/06 12:12 AM Page 8


Page 9
9


Compass





SPT





Specifications


Frame style
Tilt
Seat width
14" - 22"
Seat depth
15" - 22"
Overall chair width
22.5"-30.5" (Seat width plus 8.50")
Overall chair length
33"-39" (without anti-tippers and
front rigging)
Overall chair height range
35.5" - 39.5"
Back angle adjustment
90 to 120 in 10 increments
Tubing outside diameter
1"
Tilt range
0 - 45
Weight of chair
35 lb.* / 61 lb.**
Weight capacity
250 lb.
Limited warranty
Lifetime on frames and crossbraces


* 18"x18", AT902, no rear wheels, no footrests, no seat pan, no back upholstery, spreader bar, no anti-tippers,
no wheel locks, no arms.
**18"x18", AT902, 22COM/Urethane, PHW93/AT5543, seat pan, back upholstery, spreader bar, anti-tippers,
wheel locks, no arms.


Seat-to-floor heights
Wheel size
5" Casters
6" Casters
6" x 2" Casters
8" Casters
18"
13.5"*
20"
14.5", 16.5"
16.5"
16.5"
22"
15.5"
15.5", 17.5"
17.5"
24"
16.5"
16.5"
16.5", 18.5"


*13.5" seat-to-floor height only available using specials number C-030917115944.


Knee-to-heel**
Range
13.5" - 21.5"


**Footplate height adjusts in 1" increments. Measurement taken from top of seat rail to back of footrests.


Arm heights***(range adjusts in 1" increments)
Adjustable height dual point
8.5" - 12.5" conventional only
T-Arms
Low Range: 8" - 12"
High Range: 10" - 16"


***Measurement taken from top of seat rail to top of armrest.


Back cane options
Fixed height
20"


Invacare


®


Compass





SPT





Self-Propelling Tilt-in-Space Wheelchair


Invacare


®


Compass





SPT





Self-Propelling T
ilt-in-Space Wheelchair


04-153:Compass SeriesCatalog 9/29/06 12:12 AM Page 9


Page 10
10


Adjustable angle brackets allow for
30 of adjustment.
Bolt-on seat rails save time and cost
on depth adjustment.
Full range of fine-tune axle
adjustment.


Positioning
For adult-sized users who need growth or space to
accommodate moderate to complex seating, XE is
an ideal choice. It offers a package of positioning
features not found on other chairs in its class.


•Adjustable angle back brackets offer 30 of


adjustment to meet needs including hip range-of-motion
limitations, trunk balance, swallowing, vision and even
kyphotic posture.


•Invacare Quick Set





washers snap onto frame
replacing cove washers in key adjustment locations,
simplifying and reducing adjustment time – an important
provider savings.


•Bolt-on seat rails allow the Compass XE to be used


with sling seat without sacrificing depth adjustability.
Seat rails and sling upholstery may be unbolted from
crossbraces and replaced with longer seat rails – again,
reducing time and cost involved in adjusting chair
for growth.


•Full range of fine-tune axle adjustment is an important


feature of the Compass XE. Over four-inches of
adjustment starting at the front edge of the back canes
allows the axle position to be moved into a position
relative to the position of the seating system. The axle
position can also be fine-tuned with different positions
every 3/8" throughout the adjustment range.


•Up to 170 of recline available when the recliner option is


chosen. The recline option may reduce the risk of
pressure sores, increase comfort and sitting tolerance,
assist with weight shift, aid in transfers and assist with
activities of daily living.


The Invacare


®


Compass





XE folding extended frame wheelchair is designed with true positioning in mind, not as
an afterthought. Navigating through the toughest positioning needs can often put your business in a tough
situation – especially in terms of adjustment and durability. The Compass XE has your solution by offering easy
growth adjustability, lightweight portability, and long-term durability to help you navigate your way to providing
successful positioning.


Invacare


®


Compass





XE Ultralightweight Custom Manual Wheelchair


Quick Set





washers (a) snap onto the
frame – preventing loss of cove
washers (b), or anyone’s temper.


a
b


04-153:Compass SeriesCatalog 9/29/06 12:13 AM Page 10


Page 11
11


Recessed head tube bolts prevent
foot propellers from scraping their legs.
Front transport tie-down brackets
are clearly marked.
Rear tie-down brackets are easily
accessible for caregivers.
Wheelchair-anchored pelvic belt.


Self-Propulsion
The Compass





XE is different than other types of ultralightweight wheelchairs for self-propellers.


•Seat-to-floor heights starting at 13.75" less seat rail allow consumers to get their feet on the ground and maintain


independent mobility. Higher seat-to-floor heights make it an ideal design for taller users.


•Recessed head tube bolts eliminate the nuts and bolts on the inside of the side frames found on other ultra lightweight


wheelchair designs. Foot propellers will avoid scraping their legs on head tube connections.


Portability
The Compass XE has also been designed to meet the needs of growing adolescents who require
lightweight portability.


•Ultralightweight design balances adjustability and weight to accommodate these two very important needs.


The chair folds tightly for storage in the trunk or back seat of a car or van.


•Transport tie-down options: The Compass XE meets today’s ANSI/RESNA W/C 19 Vol.1 Section 19.5.3 Frontal Impact Test.*


Durability
With your most active wheelchair users, more bolted connections on a wheelchair often equate to more
maintenance and long-term durability issues. The Compass XE is designed to minimize these issues.


•One-piece side frames with increased spacing between the top and bottom tubes reduce the number of bolted


connections found on multi-piece side frame folders, improving the durability.


•Aluminum-reinforced head tubes lock head tube bolts into place, preventing loosening and costly side frame


replacement. The head tubes endured Invacare’s stringent product design testing and remained solid and stable
throughout the tests.


•Improved cross links have been strengthened to endure many years of folding.


* This wheelchair conforms to the requirements of ANSI/RESNA W/C 19 vol. 1 – section 19.5.3 (Frontal Impact Test), as tested with the
Invacare


®


Personal Back





10 back cushion and Infinity


®


seat cushion. Invacare has not performed testing with any other seating system.
Invacare recommends that wheelchair users NOT be transported in vehicles of any kind while in wheelchairs. As of this date, the
U.S. Department of Transportation has not approved any tie-down system for transportation of a user while in a wheelchair in a moving
vehicle of any type. See each product’s sell sheet for the ANSI/RESNA W/C 19 sec. 6.2 Presale Literature Notification.


Invacare


®


Compass





XE Ultralightweight Custom Manual Wheelchair


Invacare


®


Compass





XE Ultralightweight Custom Manual Wheelchair


04-153:Compass SeriesCatalog 9/29/06 12:13 AM Page 11


Page 12
ANSI/RESNA W/C 19 sec 6.2 Presale Literature Notification - Compass XE
A.Minimum turning radius 22.0".
Minimum turn-around width 38.5".
(16" W Medium Frame chair without footrests).
B.Compass XE wheelchairs 17"D or deeper or longer than 1220 mm, exceeding the ADA definition of a common wheelchair and the maximum length
requirements of lifts on public vehicles, and may therefore present particular difficulties accessing some vehicles.
C.Total wheelchair mass = 40.0 lb (18.1 kg) - including front riggings, wheel locks, TRO brackets, wheelchair-anchored pelvic belt. Does not include seating.
D.Average lateral dummy displacement = approximately 0.75" (19 mm).
E.Overall Score = 15.
Overall Rating = B.
F. i.The Compass XE tested was sized to accommodate a 170 lb. test dummy. (Medium Frame, 16"W X 16"D, 60 degree front rigging, 24" composite wheels, 24"
urethane tires, Invacare


®


Infinity


®


seat cushion, Invacare Personal Back





10 seat system, 6" composite/urethane casters.)
ii.The Compass XE tested was tied-down using four tie-down brackets - 2 brackets located near the front of the seat frame and 2 brackets located on the
rear of base frame.
iii.The Compass XE was tested with a 170 lb. test dummy.
iv.The Compass XE tested used a wheelchair-anchored pelvic belt and vehicle-anchored shoulder belt.
v.The Compass XE tested complies with the performance requirements of ANSI/RESNA W/C 19 sec 5.3.
G.For all types of vehicles, the Compass XE requires four SAE J2249-compliant tie-down strap assemblies for effective securement.
H.When the TRRO or TRBKTS option is selected, the Compass XE provides a location for anchoring of an Invacare provided pelvic belt. This belt has
been tested in accordance with ANSI/RESNA W/C 19.
I.The wheelchair-anchored pelvic belt is supplied by Invacare.


Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324


Invacare, the Blue
Medallion Design, Yes,
you can., Infinity and
Solara are registered
trademarks and Anything
else is a compromise,
Compass, Personal
Back10, Quick Set, Smart
Adjustability and SPT are
trademarks of Invacare
Corporation.
Specifications are
subject to change
without
notification.
© 2006
Invacare Corporation
Form No. 04-153
Rev. 09-06
‘‘Invacare says
‘Yes, you can.


®’


and I
couldn’t have said it
better myself.’’


Compass





XE Specifications


Seat width
14" - 20"
Seat depth
14" - 20"
Overall chair width open
Seat width plus 8.5"
Overall chair depth
25" - 35" (without anti-tips and
front riggings)
Overall chair height range
28" - 38"
Back angle adjustment
80 to 110 in 5 increments
Tubing outside diameter
1"
Weight of chair
19 lb.*/36 lb. **
Weight capacity
250 lb.
Limited warranty
Lifetime on frames and crossbraces


* 18" x 16", AT902, no rear wheels, no footrests, no anti-tippers, no wheel locks, no arms.
** 18" x 16", AT902, 24SP,PNEU, 70NTAPER, seat upholstery, back upholstery,
wheel locks, no arms.


Cane Options


Sportster
10" - 14" or 12" - 16" adjustable
10 with push handles
14" - 18" adjustable N/A fixed
Straight with push handles
12" - 16" or 14" - 18" adjustable
18" or 20" fixed


Knee-to-heel*


Folding frames w/ seat rails min
max
60
15.25"
19"
60 MFX
11.50"
15.50"
70
14"
19"
70 MFX
8.25"
14"
70 Tapered
16.25"
20.25"
Elevating
15.75"
21.75"
90
5.75"
10.25"


* Range adjusts in 1" increments. Measurement taken from top of seat rail to back of
footrest


Arm heights


AT99N*
5" - 10"
AT55D*
5" - 13"
AT55F*
5" - 13"
DESKADJCV, FULLADJCV*
10" - 14"
TAD**
Low Range
6" - 10"
TAF**
High Range
8" - 14"
Cantilever
Non-locking
6" - 9"
Locking
9" - 12"


* Range adjusts in 1" increments. ** Range adjusts in 0.5" increments.
All measurements from top of seat rail to top of armrest. On AT55D and AT55F, add 1"
for upholstered arm pads. For less-seat-rail chairs, add 1.5" to above measurements
(top of upper frame rail to top of armrest)


Invacare


®


Compass





XE Ultralightweight Custom Manual Wheelchair


Invacare


®


Compass





XE Ultralightweight Custom Manual Wheelchair


Seat-to-floor-heights


3"
5"
Fork
AT900
AT901
A1103
15.25"
16.25"
3" fork
15.75"
16.75"
16.50"
17.50"
17"
18"
6"
8"
Fork
1259
AT903
A1108
18"
19"
8" fork
18.50"
19.50"
19"
20"
19.25"
20.25"
19.50"
20.50"
19.75"
20.75"
20.25"
21.25"
20.75"
21.75"
3"
5"
6"
Fork
AT900
AT901
AT902
A1105
16.25"
16.75"
17.25"
5" fork
16.75"
17.25"
17.75"
17.25"
17.75"
18.25"
17.50"
18"
18.50"
18"
18.25"
18.75"
18.50"
18.50"
19"
19"
19.50"


04-153:Compass SeriesCatalog 9/29/06 12:13 AM Page 12